Are you looking for the most badass tunes available for your Dynojet Powervision? Here you are! These tunes are for customers that already have the Powervision for the RZR XP Turbo. We are highly experienced in tuning the RZR models and that will show. Our tunes are also easily labeled and will show rough horsepower claims with supporting mods such as exhaust and clutching. These tunes modify all the necessary maps to create big horsepower, while still maintaining a reliable and safe RZR. Each tune is built specifically for your Powervision allowing us to change the tire size or fan temp if needed. We need you to send your PV_INFO file to us before we can send the tunes. For more information on how to get this, see the below description, or this VIDEO.
Massive horsepower gains
Quicker throttle response and power delivery
Throttle by wire limiters disabled
Tunes will not throw an overboost code
Fan on/off temp lowered to 190/185 degrees Fahrenheit
Seatbelt limiter disabled
Speed limiter removed in low and high gears
Rev limit at a safe 9200rpm
The Level 1 tune is great increase in boost showing a 20-25rwhp gain at 14-14.5psi of boost maximum. This tune is extremely responsive, and will be your "hold it pinned for a mile" tune. Very easy on the motor, yet big power. This tune works excellent with the stock, or aftermarket exhaust. Stock clutching can be used, however clutching will provide a bigger difference.
The Level 2 tune offers 15-15.5psi of boost and a wicked 30-35rwhp gain. This level 2 tune gives you roughly the same power and boost as a stock 2017 machine, giving reliable and big power you can hammer on all day. This tune can be used with the stock or aftermarket exhaust. Clutching is not necessary, but is highly recommended to properly transfer the power to the ground. 91 Octane tune.
The Level 3 tune offers 100% maximum horsepower on pump fuel! Running 16-16.5psi of boost max, we gain a huge 40-45rwhp! Requires 91-93 octane fuel. If you are running 91 octane, be sure it's non ethanol & non oxygenated. If your area does not offer quality pump fuel, a half can of VP Madditive or Torco Accelerator will work. A small mix of a 1/2 gallon race fuel would also work to boost the octane to a safe level with this tune. Exhaust is recommended
The Level 4 tune is using race fuel to richen up the mixture so the injectors do not max out, and to safely allow you to run just over 17 max PSI of boost(Roughly +50rwhp) on the stock fuel injectors. Exhaust and clutching are needed with this tune! 110 Octane fuel or better is necessary. VP 110 or sunoco 110 is recommended. DO NOT USE AV GAS WITH THIS OR ANY TUNE NOT DESIGNED FOR IT! We also recommend shortening your waste gate actuator rod by 1.5-2 turns. This VIDEO shows how to do this.
Max boost levels are listed as reference only. Altitude, temperature, charge temps, intercooler temps and many other conditions play into a factor of final boost output. AA tunes do a better job of making sure you reach these levels as the factory tunes are overly safe, and have the EPA regulations to work around.
Why our tunes over the dynojet tunes? This really depends on our tune level. The great thing with our tunes is they are easily labeled, list boost numbers, and rough horsepower gains. They have been proven to make and hold power longer than the dynojet tunes. Not only this, but we test with clutching, exhaust, and other parts to ensure our tunes work well with all factors. Lower level tunes(1-2) are actually much safer than a dynojet "max boost" tune especially if running stock exhaust, yet deliver more power than their low boost tunes. Safer tunes will hold power longer, and be much easier on your motor. When your RZR detunes because boost is too high for the modifications or fuel, it can become slower than stock! Our level 3 tune has higher boost, and comes on harder. Our level 4 tune and up are adding in race fuel and will offer even more power than any dynojet tune. Since we have so much time on RZR's, we know the limits and can push the limiters further giving you higher speed limits, and many other things hidden in our maps. Everything is taken care of for you, ensuring you have the best tune(s) out there... that should be worth every penny!
Tunes are said to "Ship for free" but will actually be e-mailed over to you within 24 hours of placing your order (On weekdays).
Not good with computers? No problem. Simply send us your Powervision and we'll install the tunes for $20 which includes the shipping back to you.
To get your PV_INFO number simply plug your into your computer (No software is needed and this will work on an Mac or Windows computer) using the supplied mini USB cord. Wait for the POWERVISION device to pop up as a drive. Once it pops up, open the folder for this device. Inside the folder for the POWERVISION you will see a PV_INFO file which will need to be attached into an e-mail and sent to email@example.com
Simply download the tunes and find where they are located(most likely the DOWNLOADS folder). Copy the tune files by highlighting them and plug your Powevision into your computer using the supplied mini USB cable. Wait for the POWERVISION to connect and open the POWERVISION drive. Then simply copy the downloaded AA tunes into the folder with the rest of your supplied dynojet tunes. Most downloaded files will go into your DOWNLOADS folder.
**Tunes are password protected so you will not be able to open or view them in the C3 tuning software**. This keeps our tunes protected from copying, and gives us a good reason to keep putting in the time to make the best tunes out there!
If you have any other needs in these tunes, or any concerns; please e-mail!